BP launches live webcam of riser flow

BP has launched a live webcam of the riser flow, which can be viewed at www.bp.com The company has been providing a live feed to government entities over the last two weeks, as well as to BP employees, industry scientists and engineers involved in the effort to stop the spill.

BP continues its work to collect oil by the riser insertion tube tool (RITT) containment system. Once on the drill ship Discoverer Enterprise, the oil is then being stored and gas is being flared. The RITT remains a new technology and both its continued operation and its effectiveness in capturing the oil and gas remain uncertain.

BP has, and will continue, to support the government's work to determine the rate of flow from the well. Since the Deepwater Horizon accident, the flow rate estimate has been established by the Unified Command. Throughout the process, BP has made it a priority to quickly and consistently provide the National Oceanic and Atmospheric Administration (NOAA) and the Coast Guard with requested information for the joint command structure to make as accurate an assessment as possible of the rate of flow.

The real flow rate
The rate of flow from the riser is determined in a number of ways and by a number of variables. For instance, while the original riser was 19.5 in. in diameter prior to the Deepwater Horizon accident, damage sustained during the accident distorted the diameter at the end of the pipe by approximately 30%. In addition, a drill pipe currently trapped inside the riser has reduced the flow area by an additional 10%. Thus, some third party estimates of flow, which assume a 19.5 in. diameter, are inaccurate. As well, there is natural gas in the riser. Data on the hydrocarbons recovered to date suggests that the proportion of gas in the plume exiting the riser is, on average, approximately 50%.

To provide further specificity on the flow rate, the US government has created a Flow Rate Technical Team (FRTT) to develop a more precise estimate. The FRTT includes the US Coast Guard, NOAA, MMS, Department of Energy (DOE) and the US Geological Survey. The FRTT is mandated to produce a report shortly.

To support this, BP is in the process of providing FRTT with all requested information, including diagrams and schematics showing release points, amounts of oil and gas currently being collected on the Discoverer Enterprise, and subsea video of the oil release point.

Published on 21/05/2010

 
 

Write your own comments

*
*
*

Recommend magazines

  Oilfield Technology