Influence of power lines on pipeline networks

AC effects on pipelines

There are three basic methods by which alternating currents (AC) and voltages can be induced on metallic structures near power lines. The first one is electrostatic coupling where the structure acts as one side of a capacitor with respect to ground. This is only of concern when the structure is above grade. Secondly, electromagnetic induction may occur when the structure is either above or below ground. In this case, the structure acts as the single-turn secondary of an air-core transformer in which the overhead power line is the primary. Finally, resistive coupling is caused by fault currents from AC power towers that flow on and off the underground structure.

Identifying hazards for personnel

Stray currents due to these induced voltages can cause corrosion of metallic structures although the amount of metal loss is less than what an equivalent amount of DC current discharge would produce. The magnitude of AC stray current is often large – hundreds of amperes under electromagnetic induction and thousands of amperes during power line faults. These high current and voltage levels can produce a shock hazard for personnel and can damage the structure and related equipment, such as cathodic protection facilities. According to NACE International Recommended Practice RP0177, ‘Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems’, potentials in excess of 15 volts should be considered hazardous and steps should be taken to reduce the hazardous potential level.

How to mitigate the risk

Influence of power lines on pipeline networksMitigation of alternating current interference is performed through the use of isolating or coupling/decoupling devices. A tailored design of the remediation solution can be a tedious task taking into account the growing complexity of corridors. Since the last decade, Cathodic protection engineers can take advantage of 3-D software that replaces empirical approaches.

Author: Jacques Parlongue, Manager Cathodic Protection, Elsyca.

Published on 30/09/2009

 
 

Related articles

South America's LNG market developments

Many experts predict that South America will become a net exporter of LNG in the future, however many challenges remain to the industry's development.

LNG 16 in Algeria

Algeria will be a fitting venue for next year's LNG 16 Conference, having staked its place as the EU's third largest supplier of foreign gas.

Australia and India: LNG partnership

Exxon Mobil's Australian division and India's Petronet have signed a 20 year LNG supply contract, signaling a step towards approval for the Western Australian Gorgon project on Barrow Island.

A pipeline demonstration centre

Siemens' Pipeline Demo Center simulates technologies on a model pipeline system.

Write your own comments

*
*
*

Recommend magazines

  World Pipelines