JIP between Swagelining Limited, Saudi Aramco and TWI

A joint industry project has been launched between Swagelining Limited, Saudi Aramco and The Welding Institute (TWI) to conduct investigations into the use of polymer lining in carbon steel pipelines. The JIP will examine the extent of corrosion incurred in a polymer lined pipeline when subjected to a sour hydrocarbon fluid environment.

Between the three parties, a total of £330 000 has been invested into the project, which commenced in October 2014 and is expected to last 30 months.

Dr Steve Brogden, technical engineering manager at Swagelining Limited, said: “We are delighted to be working closely with Saudi Aramco and TWI on this JIP. When compared with corrosion resistant alloys, polymer lining systems are attracting growing interest within the pipeline industry. This comes as a result of significant cost advantages, increased corrosion prevention and reduced fabrication and installation time.

“All three parties felt that it was time to build upon this interest and demonstrate concrete evidence of how polymer lining can perform under a range of conditions.

“We are excited by the potential this JIP brings and look forward to seeing the results. We are confident this will represent a step change in pipeline management, particularly as we see operators looking to reduce costs whilst maintaining a high level of operational efficiency.”

The JIP is divided into two parts. Part A, sponsored by Swagelining and Saudi Aramco, will use applied testing on lined pipe sections to determine the corrosion rate during simulated service conditions for 180 days.

This section of the JIP will also look at the occurrence of liner collapse during multiple pressure cycles, and how this can be prevented by implementing an internally vented system which will be represented by Swagelining’s LinerVent™.

Part B is funded by TWI and will look to gain an understanding of the transport processes through the partially confined polymeric layer. TWI’s diverse expertise means that it is able to deal with all of the material components of the project.

The JIP has plans for further growth, achieved through sponsorship and involvement from other organisations, which will allow additional, more extensive testing of higher temperature polymeric and composite liners.

Dr Brogden added: “We hope to attract input from further parties which can add value to this JIP, particularly in the latter stages as we look to perform tests under strenuous conditions. As the offshore oil and gas industry continues to move into more hazardous and extreme environments, it is critical that we demonstrate how polymer lining systems can continue to be used.”

Paul Woollin, director of research at TWI, said: “There is appreciable interest in the use of polymer lined pipe for affordable, corrosion resistant hydrocarbon production. Currently, there is a lack of supporting integrity data, in particular for sour fluids, to provide sufficient confidence for widespread use. TWI’s JIP specifically aims to address the primary issues from an industry perspective, namely the enduring concern of ‘liner collapse’ and risk of corrosion of the carbon steel pipe.

“Supporting work in the TWI Core Research Programme aims to underpin the JIP by providing a fundamental understanding of both the time-dependent alteration in the polymer layer and processes occurring at the polymer-carbon steel interface.”

Adapted from press release by Joe Green

Published on 19/02/2015

Get your FREE Oilfield Technology magazine »

Get your FREE trial of Hydrocarbon Engineering magazine »

Get your FREE trial of World Pipelines magazine »


Related articles

Saudi Aramco and ExxonMobil joint venture completed

Saudi Aramco Mobil Refinery Company Limited has completed construction of major desulphurisation facilities.

Saudi Aramco contracts SEPCO for gas compressor stations

China’s Shandong Electric Power Construction Corp will install two booster gas compressor stations for Saudi gas pipeline.

Saudi Aramco growing its presence in the chemicals market

According to IHS, Saudi Aramco is becoming a global competitor in chemical production.

Saudi Aramco awards Baker Hughes drilling systems contract

Saudi Aramco has awarded Baker Hughes a two year contract for two fit for purpose underbalanced coiled tubing drilling packages designed to re-enter existing wells in the gas fields of southern Saudi Arabia.

Recommend magazines

  Oilfield Technology  World Pipelines