ASDEC offers new full surface strain measurement capability

ASDEC is now able to undertake detailed non-contact surface strain measurements to add to its world leading capabilities in the measurement and analysis of vibration. The University of Leicester facility is using its Polytec 3D scanning laser vibrometer to undertake a detailed surface scan to measure component strains and to produce, by calculation, a full-field map of stresses and strains that is directly comparable to the engineer’s Finite Element (FE) results.

Knowledge of stresses and strains in a component and an understanding of their origins is vital to design engineers considering the durability of their product. Obtaining a detailed map of the component stresses and strains under dynamic loading is highly time consuming using traditional methods. Added to this the placement of strain gauges on modern extremely lightweight materials can have a measurable effect on damping and stiffness causing uncertainty in the results.

The ASDEC use of 3D scanning laser is a non-contact method that does not add mass to the structure and therefore has no observer effect on the results. These high quality results are extremely quick to obtain as there is no need to invest time in the delicate art of affixing foil strain gauges to the component.

Tim Stubbs, General Manager at ASDEC says,

“By offering the capability of 3D full surface strain mapping on curved surfaces ASDEC is taking its capabilities to the next level. The ability to obtain detailed maps of component stresses and strains under dynamic load conditions will be extremely interesting to engineers particularly in the aerospace field where durability of components such as turbine blades is a critical concern.  In addition the ability to produce results with enough detail to directly compare the measured strains directly back to FE models will allow all durability engineers to improve their design cycles”

ASDEC is also able to utilise robot controlled placement of the system to allow the 3D scanning lasers to fully track a curved surface.  This level of control helps maintain the orientation of the laser heads with a curved surface allowing for detailed measurements of strain on complex components such as turbine blades in extremely short timeframes compared to conventional methods.

ASDEC’s system can be programmed to scan full surface strain of any object that can be fitted into the test chamber.  In addition to this ASDEC offer a remote scanning service utilising their mobile 3D scanning laser vibrometer allowing equivalent testing at a customer’s private location.

The team at ASDEC are always happy to discuss how these new techniques might assist and engineering facility’s existing testing activity or help solve long standing problems for which traditional methods of not been able to provide sufficiently accurate or detailed information.


Adapted from a press release by David Bizley

Published on 06/02/2015


Get your FREE Oilfield Technology magazine »

Get your FREE trial of Hydrocarbon Engineering magazine »

Get your FREE trial of World Pipelines magazine »


 
 

Recommend magazines

  Oilfield Technology