Conductor Installation Services Ltd complete installation

Conductor Installation Services Ltd (CIS), an Acteon company that provides hammer services to install conductors and drive piles, announced that it successfully completed a conductor installation operation 17 hours ahead of schedule for a leading North Sea oil and gas operator.

Work was carried out on a major gas project in the Southern North Sea. CIS was retained to install six 30-inch conductors on the project to form the foundations of six development wells. In addition, CIS was required to supply cold-cutting services, and all conductor-running, handling equipment, together with drive shoes.

The five-member CIS crew worked with rig contractor Ensco and the operator to commence the first phase of the operation. Working from the jack-up rig Ensco 80, CIS used a 90 kJ hydraulic hammer to drive the first conductor to its target depth on the wellhead platform. Due to issues involving cold cutting placement, it was jointly decided that it would be best to flame-cut the conductor online and carry out the cold cut offline. By doing so, it also made it possible to install the centralisers offline. By adjusting the plan to cold cut offline, 3.5 hours of online time was saved during this initial conductor-driving operation. This practice was then applied for all installation operations required for the five remaining wells. As a result, the job was completed a full 17 hours ahead of schedule. The operator realised significant cost-savings in terms of reduced equipment rental fees, rig time and labour.

With the hammer’s ability to drive conductors with pinpoint accuracy, each one was efficiently driven to its target depth. The longest conductor driven measured 400 feet from the rig floor to the conductor toe, ultimately reaching a depth of 157 feet below the mudline of the seafloor.

“All parties worked together to achieve the same objective: to install the conductors safely, in the quickest, most effective way possible,” said Andy Penman, Group Managing Director of CIS. “To achieve this, we invested a great deal of care and attention to the strategic planning process. I also attribute our success to the experience of our crew and the excellent working relationship we share with this valued client and everyone involved. The fact that our joint efforts resulted in completing 17 hours ahead of schedule without a single LTI is especially satisfying.”

Work on the wellhead platform was carried out as the result of a contract awarded to CIS by the operator. Over time, CIS has worked on behalf of this operator numerous times in the Southern North Sea, and is preparing to install conductors for the foundations of new wells on the next phase of this major development.


Adapted from press release by Joe Green

Published on 16/02/2015


Get your FREE Oilfield Technology magazine »

Get your FREE trial of Hydrocarbon Engineering magazine »

Get your FREE trial of World Pipelines magazine »


 
 

Related articles

Conductor centraliser installation milestone for Claxton

Claxton, an Acteon company, has installed more than 5000 conductor guide centralisers, making the company the market leader for conductor centraliser installation in the North Sea.

Completion of the Umugini Pipeline announced

Oando Energy Resources announces completion of pipeline.

Completion date extended for Iran-Pakistan pipeline

According to ministry officials, the completion deadline for the Iran-Pakistan gas pipeline project has been extended from December 2014 to December 2015.

Installation of three LNG storage tanks for world first FLNG

Installation of three LNG storage tanks into the hull of the Caribbean FLNG project.

Recommend magazines

  Oilfield Technology