DNV: Industrialisation and standardisation could cut North Sea offshore wind costs by up to 28%

DNV led the joint industry project (JIP) with eight companies across the European offshore wind supply chain – EEW Special Pipe Constructions GmbH, Fred Olsen Windcarrier ASA, Groningen Seaports N.V., Iemants N.V., Jan De Nul N.V., Vestas Wind Systems A/S, Van Oord Marine & Dredging Contractors, and Vattenfall Vindkraft A/S – in response to rising project costs, uneven auction results, and stop-start development pipelines. The study models the levelized cost of energy (LCoE) under three North Sea scenarios from 2025 – 2050. It assesses longer production runs for current turbine platforms as an additional route to lower costs alongside turbine upscaling.

The scenarios show how market growth and production-run length affect costs:

• Business as usual: Moderate growth and a short production run for the current turbine platform reduce LCoE by about 5% by 2035.
• Longer production runs: Under the same market growth, the reduction reaches about 14% by 2035 and 25% by 2050.
• Highest-volume scenario: Sustained deployment increases the reduction to about 19% by 2035 and 28% by 2050.

The model uses turbines around 15 MW on monopile foundations as a refer-ence platform, without identifying 15 MW as the optimum size or limiting future turbine development.

“Suppliers invest against projects and firm capacity commitments. Europe’s offshore wind targets show the scale of long-term demand, but the industry also needs visible, investable project pipelines,” said Ditlev Engel, CEO, Energy Systems at DNV. “Steadier demand and longer production runs can make better use of existing capacity and show where investment is needed in support of the business case, firm delivery is the most important KPI of all and for bringing down the cost.”

The report calls on policymakers to turn deployment targets into visible project pipelines and consistent auction schedules; developers and turbine manufacturers to align earlier on design envelopes and interfaces; and suppliers to invest in identified constraints before broader capacity expansion.

Most of the modelled reduction comes from lower CAPEX, led by turbine and project-development costs. Installation and substructure costs provide further savings. Stable platforms can also improve reliability and energy output, while shorter schedules bring generation online sooner.

DNV found that existing European capacity can broadly meet near-term demand for turbines around 15 MW. In the high-volume scenario, however, ports become a constraint and installation capacity approaches its limit, requiring expansion and selected upgrades. The immediate risk is underuse: irregular project flow weakens the case for investment and the industry’s ability to respond when demand rises.

“Industrialisation and standardisation have been discussed for years, but their economic impact had not been quantified in this detail. Our partners trusted DNV to lead frank discussions about commercially sensitive information. We have now documented significant cost-reduction potential, up to 28% under favourable deployment conditions, giving the industry and governments a basis for practical work to make European offshore wind more cost-effective over the next decade,” explained Peter Constantin Brun, Global Segment Leader, Offshore Wind, DNV.

Stable designs and processes could also reduce waste, rework, transport, and energy use. Bringing projects online sooner could provide further environmental gains by displacing fossil-fuel generation.

To capture the full cost-saving potential identified in this study, policymakers should provide long-term certainty through consistent auction schedules, predictable project pipelines, and regulatory frameworks that enable greater industrialisation and standardisation across the offshore wind supply chain.

The scenarios draw on DNV’s Energy Transition Outlook 2025 and North Sea Forecast, project pipeline data, and the deployment ambitions in the Ostend and Hamburg declarations.

For more news and technical articles from the global renewable industry, read the latest issue of Energy Global magazine.

Energy Global’s Summer 2026 issue

The Summer issue of 2026 is out now! The new issue starts with a regional report on Latin America and the Caribbean, considering the benefits and challenges of renewable energy development in the region. The issue also covers topics such as lubricants, digitalisation, the importance of ports, battery storage technology, and more! With contributors from industry leaders including ABB, WindEurope, Sungrow, among others, this is an issue not to miss.

Read the article online at: https://www.energyglobal.com/wind/08092026/dnv-industrialisation-and-standardisation-could-cut-north-sea-offshore-wind-costs-by-up-to-28/