Gazelle Wind Power develops floating platform design for 18 MW+ wind turbines

The design is being developed as part of Gazelle’s work with a major Asian utility on a large scale floating offshore wind development at a typhoon-prone site.

Global performance simulations indicate that Gazelle’s new platform design can support 18 MW+ turbines under severe wind, wave, and current conditions. Costing exercises also indicate that the new design could deliver 44% lower CAPEX and 52% lower LCOE than the benchmark semi-submersible designs assessed.

The new design retains the core principles of Gazelle’s technology, combining a central counterweight with three Articulated Mooring Frames (AMFs) with near-vertical mooring lines to provide passive restoring force as wind, waves, and currents act on the platform. This helps control platform motion and mooring loads without an active ballast system.

In the new configuration, Gazelle has refined the platform around a tripod support structure, upgraded AMFs, and revised hull geometry. The changes improve hydrodynamic performance, mooring flexibility, and load distribution, while reducing structural weight and increasing damage tolerance. Together, they are designed to support larger turbines and commercial scale deployment.

The study assessed the new design under both normal and extreme environmental conditions, including survival and power-production cases. The platform was assessed for a typhoon-prone site with a 50-year extreme wind speed of 59.8 m/s at a hub height of 155 m and a 50-year significant wave height of 14.2 m.

The simulations showed controlled platform behaviour under these conditions. Roll and pitch angles remained below 5°, while accelerations at the top of the tower and tower-base loads remained within the project’s design criteria. These results therefore indicate that Gazelle’s constant-load mooring system can maintain low platform motions while providing lower mooring loads than a TLP and a smaller floater footprint than conventional semi-submersible, barge, or spar designs.

A preliminary costing exercise was also completed which assessed the new design against standard semi-submersible benchmarks. The results indicate potential reductions of around 44% in CAPEX and 52% in LCOE compared with the benchmark case.

These cost reductions are driven by the platform’s lower structural and mooring requirements, compact footprint, modular steel construction, and ability to use existing port infrastructure. The design also allows simpler installation and tow-to-port maintenance, reducing reliance on specialist offshore vessels and helping limit downtime, which can increase energy production and lower lifetime operating costs. Additionally, Gazelle and the client have recently completed a basin-test campaign to compare physical test data with the numerical model and support further model calibration. The results will feed into subsequent engineering stages.

Jason Wormald, Chief Technology Officer at Gazelle Wind Power, commented: “These results show that Gazelle can scale to the next generation of 18 MW+ turbines without simply making the platform bigger and heavier. Even in extreme offshore conditions, the design maintains strong control of motion and structural loads, reinforcing its potential for commercial scale deployment.”

Jon Salazar, CEO at Gazelle Wind Power, noted: “Gazelle’s technology has always been designed to reduce the material, infrastructure, and cost required to deploy floating wind. With this hugely innovative new 18 MW+ design, we are showing that those advantages can be carried into larger turbines and more demanding offshore conditions. With the cost reductions demonstrated by this new design, our technology could help make floating wind viable in places that have previously been too challenging or expensive to develop.”

For more news and technical articles from the global renewable industry, read the latest issue of Energy Global magazine.

Energy Global’s Autumn 2026 issue

The Autumn issue of 2026 is available now! The new issue begins with a regional report on Asia Pacific, looking at the region’s transition from building capacity to building systems. The issue also explores topics such as offshore wind foundations, solar maintenance, training the new workforce, inspection & maintenance, and more! With insights from experts such as Everllence, BW Ideol, EM&I, Watson Farley & Williams, and many more, make sure to check out this issue now.

Read the article online at: https://www.energyglobal.com/wind/21092026/gazelle-wind-power-develops-floating-platform-design-for-18-mw-wind-turbines/