Skip to main content

Eco Wave Power awarded installation permit for Israeli wave project

Published by
Energy Global,


In a significant regulatory milestone, Eco Wave Power (EWPG Holding AB) has announced that it has secured the engineering co-ordination permit from the Municipality of Tel-Aviv Jaffa (permit number 2020-3249) needed for the cement works and installation of ten floaters for the EWP-EDF One wave energy project in the Port of Jaffa, Israel.

This permit allows Eco Wave Power to proceed with the actual installation of the project in the seaside of the breakwater, which shall include cement works for the breakwater’s reinforcement and the installation of ten floaters, on 30 linear m of a pre-existing breakwater within the port, having an installed capacity of 100 KW. Each floater will have a surface area of 8.54 m2. All civil works were planned and will be supervised by Alex Gleizer, a civil engineer with 25 years of experience, executing projects for the Israeli Railway Company, the Israeli Air Force, and the Israeli Electric Company.

“I have taken part in multiple energy projects, such as a 495 MW traditional power station in 2012 and a pumped storage hydroelectricity project in the Gilboa in Israel in 2017, but Eco Wave Power’s wave energy technology is definitely the most unique and innovative project that I have taken part in. I am very excited to take part in this project by supervising the execution of the civil works in a safe and reliable manner,” said Alex Gleizer.

“We are delighted to announce this milestone, which is a final engineering coordination permit that enables us to continue with the cement works and floaters’ installation portion of our works, and is bringing us one step closer to deploying our second grid-connected wave energy power station. Due to the onshore nature of the Eco Wave Power technology, the cement and floaters installation works will be straightforward and will not involve any ships, divers, underwater cables or underwater moorings, which are known to be extremely expensive and complex. All works will be performed from the land side, using standard equipment such as cranes, thus reinforcing the cost-effectiveness of the Eco Wave Power technology, in comparison to offshore solutions,” said Inna Braverman, Founder and Chief Executive Officer of Eco Wave Power.

The works, which will be executed via a sub-contractor, are expected to be completed in the upcoming months.

The EWP-EDF One project is executed in collaboration with EDF Renewables IL and co-funding from the Israeli Energy Ministry.

 

 

For more news and technical articles from the global renewable industry read our latest issue of Energy Global magazine.

Energy Global’s Winter 2020 issue

The Winter issue of Energy Global provides a range of technical articles covering technological advancements and future outlooks in the renewables sector, from companies including CorPower Ocean, Rystad Energy, Black & Veatch, Voltalia, FUERGY, and more.

 

 

Read the article online at: https://www.energyglobal.com/other-renewables/12022021/eco-wave-power-awarded-installation-permit-for-israeli-wave-project/

You might also like

 

Vestas adds to Swedish project pipeline

The company has received a new order from TRIG to supply, install and commission 12 of its V162-5.6 MW turbines for the Grönhult wind project in Sweden.

 
 

Embed article link: (copy the HTML code below):